Directions for Darks are below but you can choose to use the pretreat any of these ways you'd like. Temp depends on color of the garment but darks are usually best pressed at 342F/172C and cured at 342F/172C when using white ink. Depending on the ink you are using you may want to cure from 90-130 seconds.
This concentrated version you will need to add 4 liters of distilled water per each 1 Liter of concentrated pretreat, so the ratio is 1:4, you can go up to 5 liters but will need to benchmark at 4 to test for print quality and washability that is acceptable to you. We recommend starting at 4 for Epson or Brother printers especially if using a conveyor. You can test a small amount to start with. Please note that we are not affiliated with Epson or Brother.
Any more water will cause skewed results but you can test on your end, it could be acceptable to you. For every 3-4 liters purchased you basically make another gallon without having to pay for it, our concentrate is stable and money saving! You not only save there but on shipping also!
Here's what Anthony Creek recommends:
1. Hang dry then press 3 times to push fibers down 8 seconds each press.
2. Press 3 intervals of 17 seconds each. You need to make sure that the pretreat is dry. 3 presses push all the fibers down giving the best print. You may need to increase the amount of pretreat and drying time for thicker items
3. Conveyor drying: Conveyor dry at 330F for 3 minutes and 3 presses of 8 second intervals depending on how much pretreat is applied.
Usually on t shirts you will need about 23 grams of pretreat and 46 for hoodies.
We strived to create a pretreat that is/does the following:
*Conveyor Friendly with heat press
*Knocks Down Fibers Well
*Can Be Hang Dried
*Works With Blended Garments
*Enhances White Ink Opacity
*Fewer Staining Issues Than our Previous Version
*Works with many DTG’s
*Concentrate Available for Cheaper Shipping Options
*Increase in Washability
AND BEST OF ALL DOES NOT STAIN IN UV!
This Pretreatment is a non-toxic spray that needs to be applied with a machine or mask. This pretreat is a great all in one solution to not have to switch pretreat!
Triblends, cottons and mixed cottons will work well and print well. All Direct to Garment Printers that print white ink on dark garments require some sort of garment pretreatment. Usually the pretreatment is a spray and you spray the shirt and hit it with a heat press.
This lays down all the fibers, giving you a nice, smooth garment to print. Be sure to use our Kraft paper for darks instead of parchment paper to achieve the best quality print. The pretreatment also helps ink to adhere to the garment, giving you a more vibrant final print and little or no fibrillation (small fibers sticking up out of the ink) PRETREATMENT IS A SERIOUS PRODUCT AND SHOULD PROPER MATERIALS SUCH AS GOGGLES AND MASKS SHOULD BE WORN AT ALL TIMES WHEN APPLYING. IT IS NON TOXIC BUT CAN BE TOXIC TO THE BODY IF INHALED. REMEMBER THAT PRETREATMENT IS GLUE, YOU BREATHE IN GLUE AND YOUR BODY WILL REACT TO THIS NEGATIVELY OVER TIME.