Products

Pearl PTM/ELITE BRASS Check Valve original and high quality

Read more less

Pearl PTM/Elite Spray Nozzle. Need help choosing the right nozzle? Check out our video

Read more less

This pipette will work on any DTG/DIRECT TO FILM/Inkjet printer. It helps to keep solution at a perfect volume in the capping station so liquid doesn't get everywhere! Great to wet cap with our Purple Hammer Cleaning Solution which can be found here;  Creek's Purple Hammer Printerhead Printhead Cleaning Solution – DTG Printer Parts

Read more less

Polyurethane Rubber Cleaning Swabs. Great for cleaning your printer. 

Read more less

1 BRASS PRETREATER 3/IV NOZZLE product code 800050. Need help choosing the right nozzle? Check out our video

Read more less

Pre Treater Stainless Steel Spray Nozzles 800050. Need help choosing a nozzle? Check out our video.

Read more less

Product description Product DescriptionSEAFLO's BRAND NEW SFDP1-016-100-34 34-Series is our continuous-duty, on-demand, positive displacement pump. It provides reliable performance in moderate water flow and high-pressure applications. This 3-chamber diaphragm pump provides up to 1.6 gallons per minute and is capable of self-priming up to 6 vertical feet, and can run dry without damage. Serves 2 or more 1/2” (13 mm) outlets. This automatic demand water system pump has a built-in pressure switch which automatically starts and stops when the fixture is opened and closed. They are easy to install, service, and winterize.Product DetailsBRAND NEW SEAFLO SFDP1-016-100-34 Water Pressure PumpWhite and Orange FinishSelf-priming up to 6 vertical feetFeatures an automatic pressure switch that can be adjustedBuilt-in check valveCapable of run dry operationIgnition Protected Technical SpecificationsVoltage: 12V DCFlow Capacity: 1.6 GPMAmperage Draw: 6.0 MAX Amp DrawValves: EPDMDiaphragm: SantopreneInlet/Outlet: 1/2" Threaded MNPTDimensions: Approx. 8.5" x 4.62" x 4.1" Technical Details Part Number SFDP1-016-100-34 Item Weight 5.52 pounds Product Dimensions 8.5 x 4.6 x 4.1 inches Voltage 12 volts Item Package Quantity 1 Flow Rate 1.6 GPM Batteries Included? No Batteries Required? No

Read more less

This is our toughest Cleaning Solution to date! Rated as our most aggressive solution that will get the toughest jobs done on any Garment Printer whether its flushing or cleaning out your head! 3 markets it is also suitable for: Paper Printing Sublimation DIRECT TO FILM DIRECT TO GARMENT You can flush your system, clean your lines and freshen your print head.  DIRECTIONS: PLACE IN CAPPING STATION, BOTTLE OR CONTAINER TO KEEP HEAD PLATE MOIST.   CAN BE USED TO UNCLOG WITH MACHINE. LIQUID MUST NOT CONTACT ELECTRONICAL  COMPONENTS. CAN PLACE IN SYSTEM AND PURGE AFTER 48 HOURS AND CHECK RESULTS.  IF PROBLEM PERSISTS KEEP IN SYSTEM LONGER. NOT FOR LONG TERM USE.  DISCLAIMER NO WARRANTY OR IMPLICATION OF WARRANTY FOR THIS PRODUCT. SINCE THE CONDITION OF HANDLING IS BEYOND OUR CONTROL, WE ASSUME NO LIABILITY FOR LOSS OR INJURY RESULTING FROM THE USE OR THE INFORNMATION HEREIN. ALL CHEMICALS MAY PRESENT UNKNOWN HEALTH HAZARDS AND SHOULD BE USED WITH  CAUTION. SAFE USE OF THIS PRODUCT IS THE  RESPONSIBILITY OF THE USER. USER MUST TEST TO DETERMINE SUITABILITY BEFORE USING. REFER TO SDS SHEETS FOR  ADDITIONAL  INFORMATION/HANDLING. DO NOT LEAVE THIS SOLUTION IN ANY PRINTER LINE, PRINTHEAD OR OTHER INK SYSTEM COMPONENT FOR MORE THAN 24 HOURS. IF YOU DO YOU RISK DAMAGING THE PRINTHEAD, LINES OR OTHER COMPONENTS. California Proposition 65 This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. For more information go to www.P65Warnings.ca.gov Remember to handle with care - gloves are a must, and goggles may be necessary when using this powerful cleaning solution.

Read more less

Protect your heat press and garments. Keep your heat press' upper platen clean and free of inks, adhesives, and excess residue from heat transfer products with this durable non-stick cover. Perfect for all heat presses, including those used for DTG and sublimation. Available in 16" x 20"

Read more less

Protect the lower platen of your heat press. This fitted non-stick cover slips snugly over the bottom heat press platen, making it easy to dress garments. Also reduces wear and tear on your heat press. Essential for proper adhesive flow.

Read more less

Protect the lower platen of your heat press. This fitted non-stick cover slips snugly over the bottom heat press platen, making it easy to dress garments. Also reduces wear and tear on your heat press. Essential for proper adhesive flow.

Read more less

Protect the lower platen of your heat press. This fitted non-stick cover slips snugly over the bottom heat press platen, making it easy to dress garments. Also reduces wear and tear on your heat press. Essential for proper adhesive flow.

Read more less