**TAKE ADVANTAGE OF OUR FREE SHIPPING OVER $205 CONTINENTAL USA ONLY** FREE GROUND TO CANADA OVER $500**

Creek Manufacturing E SERIES LOW VISCOSITY ( LV2) VIVID DTG DIRECT TO GARMENT BULK INK

Description


2ND DAY SHIPPING WHITE INK LITER PACK IS FOR INK ONLY, OTHER ITEMS WILL SHIP MOST ECONOMICAL.

Washability
Our white is bright and CMYK has nice washability. You will be pleased with the results.

Directions:
Cure CMYK only prints at 325°F/162°C for 60 seconds at a minimum. You can cure at a higher temp and time also but with certain garments heat may scorch the garment
Cure W+CMYK prints at 338°F/170°C for 130 seconds. Using a higher temp will cure faster. Poly/Cotton/Rayon blends work well as well as 100% cotton. Poly/Cotton only blends
achieve better results when used with a conveyor/heat press combination. Use low to medium pressure.


Conversions

If you are converting from other inks you will NOT need to flush your current ink set out. 

SDS sheets are available upon request. 

*Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling.

Results are not guaranteed and will depend on machine settings/environment. If using for DIRECT TO FILM you should test before purchasing large volumes.

Epson based DTG's with a DX5 and DX7 head. Printers with a 5113 head and more. We recommend in printers that are bigger than 12 inches wide in print area to use 35% humidity or higher. Please note we are not affiliated with Epson.
Epson based DTG's with a DX5 and DX7 head. Printers with a 5113 head and more. We recommend in printers that are bigger than 12 inches wide in print area to use 35% humidity or higher. Please note we are not affiliated with Epson. The Direct-To-Garment Ink – EPSON® Repurposed DTG Compatible ink is neither produced nor endorsed by the above listed companies. User assumes liability in using this product. Any company listed companies are registered trademarks of the respective companies.

WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user.
Product form

2ND DAY SHIPPING WHITE INK LITER PACK IS FOR INK ONLY, OTHER ITEMS WILL SHIP MOST ECONOMICAL. Washability Our white... Read more

$147.00

  • Widely used by many customers
  • Trusted
  • Quality Assured
  • Shipped today? Order within: Dec 14, 2024 12:00:00 -0800

Description


2ND DAY SHIPPING WHITE INK LITER PACK IS FOR INK ONLY, OTHER ITEMS WILL SHIP MOST ECONOMICAL.

Washability
Our white is bright and CMYK has nice washability. You will be pleased with the results.

Directions:
Cure CMYK only prints at 325°F/162°C for 60 seconds at a minimum. You can cure at a higher temp and time also but with certain garments heat may scorch the garment
Cure W+CMYK prints at 338°F/170°C for 130 seconds. Using a higher temp will cure faster. Poly/Cotton/Rayon blends work well as well as 100% cotton. Poly/Cotton only blends
achieve better results when used with a conveyor/heat press combination. Use low to medium pressure.


Conversions

If you are converting from other inks you will NOT need to flush your current ink set out. 

SDS sheets are available upon request. 

*Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling.

Results are not guaranteed and will depend on machine settings/environment. If using for DIRECT TO FILM you should test before purchasing large volumes.

Epson based DTG's with a DX5 and DX7 head. Printers with a 5113 head and more. We recommend in printers that are bigger than 12 inches wide in print area to use 35% humidity or higher. Please note we are not affiliated with Epson.
Epson based DTG's with a DX5 and DX7 head. Printers with a 5113 head and more. We recommend in printers that are bigger than 12 inches wide in print area to use 35% humidity or higher. Please note we are not affiliated with Epson. The Direct-To-Garment Ink – EPSON® Repurposed DTG Compatible ink is neither produced nor endorsed by the above listed companies. User assumes liability in using this product. Any company listed companies are registered trademarks of the respective companies.

WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user.

Reviews

Creek Manufacturing E SERIES LOW VISCOSITY ( LV2) VIVID DTG DIRECT TO GARMENT BULK INK

Creek Manufacturing E SERIES LOW VISCOSITY ( LV2) VIVID DTG DIRECT TO GARMENT BULK INK

0 out of 5 stars

This product has no reviews yet

Recently viewed products

Login

Forgot your password?

Don't have an account yet?
Create account