Products

Compatible with IE3200 / 4720 HEADS. This is a 14 Pin Cable. 50cm/500mm/19.5 inch length  Please note that this non oem and we are not affiliated with Epson

Read more less

This Product is one ink funnel filter. Great for those times where you may think something went into your ink bottle but need a solid solution to filter out the funk. The funnel has an air whole also to get better flow with the liquid being poured down the funnel. Can work with all types of inks other than UV. Will work with DTG / Direct To Garment, DTF, Direct To Film, Sublimation, Dye Based, Pigment, water or textile inks.

Read more less

Looking for high-quality DTF/Direct to Film inks to bring your graphics to life? Inkbank 5602 White and 5602 CMYK inks are just what you need. These inks are designed to produce bright and vibrant graphics, perfect for any project. Tested for compatibility with our films Great for high-end, bright graphics INK BANK BRAND for printing on direct to film DTF systems with a DX5/DX7 print head (Printers utilizing IE3200 / 4720 / 5113 / XP600 Heads.  WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user.  This product may expose you to chemicals including Di-n-butyl phthalate (DBP) , which are known to the State of California to cause birth defects or other reproductive harm. This warning is posted because of the legal requirements of the State of California. For more information, please visit www.p65Warnings.ca.gov. DISCLAIMER NO WARRANTY OR IMPLICATION OF WARRANTY FOR THIS PRODUCT. SINCE THE CONDITION OF HANDLING IS BEYOND OUR CONTROL, WE ASSUME NO LIABILITY FOR LOSS OR INJURY RESULTING FROM THE USE OR THE INFORNMATION HEREIN. ALL CHEMICALS MAY PRESENT UNKNOWN HEALTH HAZARDS AND SHOULD BE USED WITH  CAUTION. SAFE USE OF THIS PRODUCT IS THE  RESPONSIBILITY OF THE USER. USER MUST TEST TO DETERMINE SUITABILITY BEFORE USING. REFER TO SDS SHEETS FOR  ADDITIONAL  INFORMATION/HANDLING. 

Read more less

These foam tipped swabs are great for cleaning out print heads on Epson printers or your direct to garment printers! These are a necessity and vital part of the cleaning essentials that you must use in order to clean your Epson printer heads and capping stations. If you fail to do this you may find yourself spending $1000 each time to fix your printer so may sure that you clean out your printer daily. If you don't clean your capping station your printer head will definitely clog up and you will find yourself spending $500 to replace your print head or more depending on what model printer you have. Each swab has a 3.75" plastic handle and a 0.5" x 1" foam tip, and solvent resistant to prevent it from tearing up when cleaning. The tips look exactly how they are pictured. Nice and white so you know that you're getting the job done.

Read more less

These foam tipped swabs are great for cleaning out print heads on Epson printers or your direct to garment printers! These are a necessity and vital part of the cleaning essentials that you must use in order to clean your Epson printer heads and capping stations. If you fail to do this you may find yourself spending $1000 each time to fix your printer so may sure that you clean out your printer daily. If you don't clean your capping station your printer head will definitely clog up and you will find yourself spending $500 to replace your print head or more depending on what model printer you have. Each swab has a 3.75" plastic handle and a 0.5" x 1" foam tip, and solvent resistant to prevent it from tearing up when cleaning. The tips look exactly how they are pictured. Nice and white so you know that you're getting the job done.

Read more less

Non OEM  Bajujet Head Compatible Damper. Compatible with print heads listed above Compatible with other models also.  For DTG or DTF printers utilizing the engines listed above Disclaimer: We are not affiliated with Epson, their name is respective or their company. Our products are not associated with Epson or any other mentioned company. The registered names and logos are the sole property of their respective companies.

Read more less

Non OEM  IE3200 / 4720/ i600 Head Compatible Damper. Compatible with print heads listed above Compatible with other models also.  For DTG or DTF printers utilizing the engines listed above Disclaimer: We are not affiliated with Epson, their name is respective or their company. Our products are not associated with Epson or any other mentioned company. The registered names and logos are the sole property of their respective companies.

Read more less

Looking for high-quality, compatible damper for your Anajet Sprint or FP125 printer? Look no further. Our Non OEM R1900 big mouth damper is the perfect solution. Made with top-notch quality, this damper is designed to meet your printing needs without breaking the bank. Compatible with Anajet Sprint or FP125 High-quality construction Non OEM design Please note that we are an independent company and not affiliated with Epson America. When it comes to reliable DTG parts, we've got you covered.

Read more less

Non OEM Spectra Head Compatible Damper. Compatible with print heads listed above Compatible with other models also.  For DTG or DTF printers utilizing the engines listed above Disclaimer: We are not affiliated with Epson, their name is respective or their company. Our products are not associated with Epson or any other mentioned company. The registered names and logos are the sole property of their respective companies.

Read more less

Non OEM  IE3200 / 4720/ i600 Head Compatible Damper. Compatible with print heads listed above Compatible with other models also.  For DTG or DTF printers utilizing the engines listed above Disclaimer: We are not affiliated with Epson, their name is respective or their company. Our products are not associated with Epson or any other mentioned company. The registered names and logos are the sole property of their respective companies.

Read more less

Non OEM  A3/ A3+ / A2 / A1 / R1900 / R2000 / L1800 / XP15000 L805 L801 R1390 Head Compatible Damper. Compatible with print heads listed above Compatible with other models also.  For DTG or DTF printers utilizing the engines listed above Disclaimer: We are not affiliated with Epson, their name is respective or their company. Our products are not associated with Epson or any other mentioned company. The registered names and logos are the sole property of their respective companies.

Read more less