Shipping Delays With Covid-19 May Occur. Tell Your Clients To Plan Accordingly. Carriers Are Not Adjusting.

DUPONT INKS

9 products

  • Purple Hammer Printerhead Printhead Aggressive Cleaning Solution

    Purple Hammer Print head Aggressive Cleaning Solution

    This is our toughest Cleaning Solution to date! Rated as our most aggressive solution that will get the toughest jobs done on any Garment Printer whether its flushing or cleaning out your head! Whether you have a Fast T-Jet, Flexi-Jet, AnaJet, Veloci-Jet , DTG type garment printer any Epson Based Garment Printer. Also suitable for: Paper Printing Sublimation DTF you can flush your system, clean your lines and freshen your print head. Be sure to do this monthly if your printer doesn't have a WIMS system on it! NOW COMPATIBLE WITH THE GT SERIES PRINTERS! Run through your maintenance cart or flush manually!

    $29.99 - $340.00

  • RED Aggressive Cleaning Solution CONCENTRATE

    RED Aggressive Cleaning Solution CONCENTRATE

    RED Aggressive Cleaning Solution CONCENTRATE This is our toughest Cleaning Solution to date! Rated as our most aggressive solution that will get the toughest jobs done on any Garment Printer whether its flushing or cleaning out your head! Whether you have a Fast T-Jet, Flexi-Jet, AnaJet, Veloci-Jet , DTG type garment printer any Epson Based Garment Printer. Also suitable for: Paper Printing Sublimation DTF you can flush your system, clean your lines and freshen your print head. Be sure to do this monthly if your printer doesn't have a WIMS system on it! NOW COMPATIBLE WITH THE GT SERIES PRINTERS! Run through your maintenance cart or flush manually!

    $64.99 - $104.99

  • Naval Orange Printerhead Printhead Head Cleaning Solution

    Naval Orange Flushing/Cleaning Solution

    This Cleaning Solution will work with any Garment Printer or photo printer for flushing or just cleaning your head. Whether you have a Fast T-Jet, Flexi-Jet, AnaJet, Veloci-Jet , DTG type garment printer any Epson Based Garment Printer using DuPont ink or any Textile ink, you can flush your system, clean your lines and freshen your print head. Be sure to do this monthly if your printer doesn't have a WIMS system on it! We are not associated with Epson or its trademarks

    $34.99 - $875.00

  • Genuine (P6000/P6900) DuPont Artistri Bulk DTG Ink- (R SERIES Ricoh Gen4, Gen5, GH220 Heads)

    Genuine (P6000/P6900) DuPont Artistri Bulk DTG Ink- (R SERIES Ricoh Gen4, Gen5, GH220 Heads)

    Genuine DuPont P6900 Artistri Ink for all dtg's with these heads listed below; • Ricoh Gen 4 (MH2420) • Ricoh Gen 4L (MH2620/MH2820) • Ricoh Gen 5E (MH5421/MH5441) • Ricoh Gen 5F (MH5421F) • Ricoh GH2220 Genuine DuPont Artistri Ink has a 60(CMYK)/120(WHITE) second cure time. Genuine DuPont Artistri Ink was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  Genuine DuPont Artistri Ink has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Genuine DuPont Artistri Ink: Cure the Genuine DuPont Artistri Ink at 340F for 60 seconds(CMYK)/120 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.  *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. DTG Printer Compatibility Since Genuine DuPont Artistri Inks are being released for all of the printers with these print heads: • Ricoh Gen 4 (MH2420) • Ricoh Gen 4L (MH2620/MH2820) • Ricoh Gen 5E (MH5421/MH5441) • Ricoh Gen 5F (MH5421F) • Ricoh GH2220

    $159.99 - $359.99

  • Mpower MP5/MP10/Ricoh Ri3000/Ri6000 220ml PURPLE HAMMER HV Cleaning solution bag (STRONG FOR CLOGS)

    Mpower MP5/MP10/Ricoh Ri3000/Ri6000 220ml PURPLE HAMMER HV Cleaning solution bag (STRONG FOR CLOGS)

    Our cleaning solution for the is great quality. When you switch to our Cleaning Solution you will save so much money and you will be surprised by the quality! We will provide you with instructions on how to pop out your current bag out of the cartridge and insert ours in, its easy and saves you money! This solution is not DuPont but is great quality.

    $28.99 - $49.99

  • 220ml Cleaning Solution Bag For Neoflex 4000 4800 4880 7600 9600 Epson Printers

    220ml Cleaning Solution Bag For Neoflex 4000 4800 4880 7600 9600 Epson Printers

    Our cleaning solution for the is great quality. When you switch to our Cleaning Solution you will save so much money and you will be surprised by the quality! We will provide you with instructions on how to pop out your current bag out of the cartridge and insert ours in, its easy and saves you money! This solution is not DuPont but is great quality.

    $19.00

  • Genuine (E90) DuPont Artistri Bulk DTG Ink

    Genuine (E90) DuPont Artistri Bulk DTG Ink

      Please note that E90 white is NOT with Creek Manufacturing pretreatment. Genuine DuPont Artistri Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, Mod1 and many more (see below). Genuine DuPont Artistri E90 Ink has a 60(CMYK)/120(WHITE) second cure time. Genuine DuPont Artistri Ink was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  Genuine DuPont Artistri Ink has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Genuine DuPont Artistri Ink: Cure the Genuine DuPont Artistri Ink at 340F for 60 seconds(CMYK)/120 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.  *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. DTG Printer Compatibility Since Genuine DuPont Artistri Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $34.99 - $254.99

  • 220ML Creek Manufacturing Ink Bags -4880 Epson, Neoflex, Flexijet 4880/4800 DTG Printers

    220ML Creek Manufacturing Ink Bags -4880 Epson, Neoflex, Flexijet 4880/4800 DTG Printers

    These bags contain 220ml of TruColour Full Spectrum Digital Ink. The product is used for replacing the bag inside a 4880/4800 cartridges. You will need to reset the chip on the cartridge after replacing, to make the machine think the cartridge is new and unused. Please see our video tutorial to see how to replace the bag in the cartridge. You can choose on any color you want on the options below. Its compatible with the Neoflex, Flexijet, I-Dot, T Jet Blazer, or RJet systems. Please note we do not have any affiliation with these companies.   DTG Printer Compatibility Since Creek Manufacturing TruColours Full Spectrum Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $39.99 - $330.00

  • Genuine (P5000 / P5910) DuPont Artistri Bulk DTG Ink

    Genuine (P5000 / P5910) DuPont Artistri Bulk DTG Ink

    Genuine DuPont Artistri Ink for all Epson Based Garment Printers including the DTG, Anajet, Neoflex, Fast T-Jet, Veloci-Jet, TexJet, FreeJet, IDot, Mod1 and many more (see below). Genuine DuPont Artistri Ink has a 60(CMYK)/120(WHITE) second cure time. Genuine DuPont Artistri Ink was formulated to "play nice" with all your printer components. This means your wiper and capping station will have less build up and will be easier to clean.  Genuine DuPont Artistri Ink has done an amazing job improving the cure time, but they didn't stop there. They made it their mission to improve the brightness of their inks AND the washability too. These high standards have resulted in longer lasting, better looking prints wash after wash. It's almost shocking to see how they look after 30 washes! Instructions for curing Genuine DuPont Artistri Ink: Cure the Genuine DuPont Artistri Ink at 340F for 60 seconds(CMYK)/120 seconds(White). You can go a little longer on the cure time, however best results are achieved at the suggested time and temperature Use light to medium pressure on the heat press to cure the ink. Allow for 24 hours after heat pressing before washing the shirt. This allows continued curing of the ink. Washing immediately will result in about a 10-15% decrease in print quality life.  *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. DTG Printer Compatibility Since Genuine DuPont Artistri Inks are being released for all of the Epson® repurposed printers you might be wondering if you will be able to use them. Some of the printers include (but not limited to): BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, M2, M4 Neoflex NeoFlex Textile Melco Melco-Jet, G2, G3 Spectra Spectra 3000 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot 2100, 4200 and M-Link OV1 FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, SuperJet and TexJet Plus Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY DIY Printers Other Printers MS Zero, MS-One, Advantage, Chinese Brand

    $36.00 - $279.99

Login

Forgot your password?

Don't have an account yet?
Create account