**FREE SHIPPING OVER $210 CONTINENTAL USA ONLY** FREE GROUND TO CANADA OVER $300**

Creek Premiere POTENT VIBRANT Light COTTON Pretreat CONCENTRATED

Description

MIX RATIO IS 1:3.25

This product is not meant to work with white ink prints.

Directions for lights are below but you can choose to use the pretreat any of these ways you'd like. Temp depends on color of the garment but lights are usually best pressed at 325F/160C and cured at the same temp or 325F/163C for 45 seconds. If you have a temperature and time that works for you then use it! Make your life simpler. 

Here's what Anthony Creek recommends:

1. Hang dry then press 2 times to push fibers down 8 seconds each press. 

2.  Press 2 intervals of 17 seconds each at 325F. You need to make sure that the pretreat is dry.  

3. Conveyor drying: Conveyor dry at 330F for 3 minutes and 2 presses of 8 second intervals depending on how much pretreat is applied. 

Usually on t shirts you will need about 19 grams of pretreat and 39 for hoodies. 

We strived to make a pretreat that may achieve the following:

*Conveyor Friendly with heat press combo when drying pretreat
*Can Be Hang Dried
*Fewer Staining Issues Than our Previous Version
*Works with many DTG’s

*Concentrate Available for Cheaper Shipping Options

This product is to be only used with 100% cotton shirts. Using with blended garments may produce results that are questionable pre and post wash. For best results, use with 100% cotton shirts and remember, not made for blends, staining pre and post wash may occur.

Warning: Work in a well-ventilated area and use protective equipment (including masks and gloves) when working with specialty printing and curing products and processes such as dtg printers, as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. 

California Proposition 65

This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. For more information go to www.P65Warnings.ca.gov

Product form

MIX RATIO IS 1:3.25 This product is not meant to work with white ink prints. Directions for lights are below... Read more

Free pickup in our shop(s)

$179.99

  • Widely used by many customers
  • Trusted
  • Quality Assured
  • Shipped today? Order within: May 20, 2025 12:00:00 -0700

Description

MIX RATIO IS 1:3.25

This product is not meant to work with white ink prints.

Directions for lights are below but you can choose to use the pretreat any of these ways you'd like. Temp depends on color of the garment but lights are usually best pressed at 325F/160C and cured at the same temp or 325F/163C for 45 seconds. If you have a temperature and time that works for you then use it! Make your life simpler. 

Here's what Anthony Creek recommends:

1. Hang dry then press 2 times to push fibers down 8 seconds each press. 

2.  Press 2 intervals of 17 seconds each at 325F. You need to make sure that the pretreat is dry.  

3. Conveyor drying: Conveyor dry at 330F for 3 minutes and 2 presses of 8 second intervals depending on how much pretreat is applied. 

Usually on t shirts you will need about 19 grams of pretreat and 39 for hoodies. 

We strived to make a pretreat that may achieve the following:

*Conveyor Friendly with heat press combo when drying pretreat
*Can Be Hang Dried
*Fewer Staining Issues Than our Previous Version
*Works with many DTG’s

*Concentrate Available for Cheaper Shipping Options

This product is to be only used with 100% cotton shirts. Using with blended garments may produce results that are questionable pre and post wash. For best results, use with 100% cotton shirts and remember, not made for blends, staining pre and post wash may occur.

Warning: Work in a well-ventilated area and use protective equipment (including masks and gloves) when working with specialty printing and curing products and processes such as dtg printers, as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. 

California Proposition 65

This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. For more information go to www.P65Warnings.ca.gov

Reviews

Creek Premiere POTENT VIBRANT Light COTTON Pretreat CONCENTRATED

Creek Premiere POTENT VIBRANT Light COTTON Pretreat CONCENTRATED

0 out of 5 stars

This product has no reviews yet

Recently viewed products

Login

Forgot your password?

Don't have an account yet?
Create account