
Recommended products (Seguno)
InkBank 5602 / 5601 DTF DIRECT TO FILM INKS
Looking for high-quality DTF/Direct to Film inks to bring your graphics to life? Inkbank 5602 White and 5602 CMYK inks are just what you need. Once our 5601 stock is gone we will be replacing with 5602. These inks are designed to produce bright and vibrant graphics, perfect for any project. Tested for compatibility with our films Great for high-end, bright graphics INK BANK BRAND for printing on direct to film DTF systems with a DX5/DX7 print head (Printers utilizing IE3200 / 4720 / 5113 / XP600 Heads. WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. This product may expose you to chemicals including Di-n-butyl phthalate (DBP) , which are known to the State of California to cause birth defects or other reproductive harm. This warning is posted because of the legal requirements of the State of California. For more information, please visit www.p65Warnings.ca.gov.
$46.99 - $859.99
Purple Hammer MAX Print head Aggressive Cleaning Solution
This is our toughest Cleaning Solution to date! Rated as our most aggressive solution that will get the toughest jobs done on any Garment Printer whether its flushing or cleaning out your head! 3 markets it is also suitable for: Paper Printing Sublimation DIRECT TO FILM You can flush your system, clean your lines and freshen your print head. Remember to handle with care - gloves are a must, and goggles may be necessary when using this powerful cleaning solution.
$59.99 - $410.00
Creek Manufacturing E SERIES LOW VISCOSITY ( LV2) VIVID DTG DIRECT TO GARMENT BULK INK
Washability Our white is bright and CMYK has nice washability. You will be pleased with the results. Directions: Cure CMYK only prints at 325°F/162°C for 60 seconds at a minimum. You can cure at a higher temp and time also but with certain garments heat may scorch the garment Cure W+CMYK prints at 338°F/170°C for 130 seconds. Using a higher temp will cure faster. Poly/Cotton/Rayon blends work well as well as 100% cotton. Poly/Cotton only blends achieve better results when used with a conveyor/heat press combination. Use low to medium pressure. Conversions If you are converting from other inks you will NOT need to flush your current ink set out. SDS sheets are available upon request. COMPATIBILITY Epson repurposed/based DTG's with a DX5 and DX7 head Printers with a 5113 head and more. BRAND Compatible with E-series Ink Anajet Sprint, FP-125, SP200 DTG Kiosks, HM1, Viper, Neoflex NeoFlex 1,2 Melco Melco-Jet, G2, G3 Spectra Spectra 3000, Spectra 600 and Spectra 3880 Fast T-Jet T-Jet, T-Jet 2, T-Jet 3, Blazer Express, Pro Belquette Flexi-Jet, Mod1 M&R Digital I-Dot FreeJet FreeJet 300TX, 500TX and 700TX PolyPrint Texjet, TexJet Plus, Shortee, Echo, Echo2, Shortee 2 Resolute Rjet-i3, Rjet-R4 and Rjet-R5 DIY Printers All DIY Printers based on an Epson Printer Other Printers MS Zero, MS-One, Advantage, Chinese Brand This DTG ink is recommended for use in Epson based DTG printers with a DX5, DX7, or 5113 head. For printers bigger than 12 inches wide in print area, it's best to use 35% humidity or higher for optimal performance. Please note that we are not affiliated with Epson or the companies listed above with respective printers in the compatibility chart. The Creek E Series Direct-To-Garment Ink is for repurposed Epson DTG's and is compatible ink (Non OEM). and any company listed above, such as is a registered trademark of the respective company. User assumes liability in using this product. We recommend in printers that are bigger than 12 inches wide in print area to use 35% humidity or higher. Please note we are not affiliated with Epson. We recommend in printers that are bigger than 12 inches wide in print area to use 35% humidity or higher. Please note we are not affiliated with Epson. The Direct-To-Garment Ink – EPSON® Repurposed DTG Compatible ink is neither produced nor endorsed by the above listed companies. User assumes liability in using this product. Any company listed companies are registered trademarks of the respective companies. *Bottle Sizes may vary during covid. Bottle sizes are approximate and can vary depending on settling. Results are not guaranteed and will depend on machine settings/environment. If using for DIRECT TO FILM you should test before purchasing large volumes. WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user.
$35.00 - $189.99
Creek MF-Multi Fabric POTENT UNIVERSAL DARK WHITE INK Pretreat
Looking for a reliable and effective pre-treatment for your DTG printing projects? Look no further than our Creek Gen 3 MF POTENT UNIVERSAL DARK WHITE INK Pretreat. With easy-to-follow directions, this versatile pre-treatment can be used in various ways to achieve the best results for your dark-colored garments. Simply choose the method that works best for you and enjoy vibrant, professional-quality prints. Conveyor Friendly with heat press combo when drying pretreat Can Be Hang Dried Fewer Staining Issues Than our Previous Version Works with many DTG's Concentrate Available for Cheaper Shipping Options 2nd Day shipping options on the drop down menu will only ship out that product, everything else will separately ground or cheapest way if the FREE SHIPPING option is chosen. Ensure to use proper materials and protective equipment when applying the pre-treatment, including goggles and masks for safety. For best results, wash your garments alone for the first two times to prevent bleeding of garment dyes onto the pretreated areas. And remember, always work in a well-ventilated area and use protective equipment when dealing with specialty printing and curing products. WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user.
$19.99 - $1,999.99
Wet Cap Max
Wet Cap MAX Optimized Wet Cap & Clog Solution for use with your printer for any wet capping needs. Cleans heads off very nicely. Remember to handle with care - gloves are a must, and goggles may be necessary when using this cleaning solution.
$39.99 - $129.99
Schulze Pretreatmaker 3 / III 4 / IV / 5 Valve - Solenoid
Schulze Pretreatmaker 3 / III 4 / IV / 5 Solenoid Valve. OEM part
$299.99
Fine White Adhesive Powder-DIRECT TO FILM/HTP / DTF
Fine White DTF Adhesive Powder, works great and is very consistent. Please note that any film we sell has been tested to work great with our inks. If using another ink it would be best to test with your ink set first before purchasing in large quantities. More than likely it will be compatible but please check first. WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. This product may expose you to chemicals including Di-n-butyl phthalate (DBP) , which are known to the State of California to cause birth defects or other reproductive harm. This warning is posted because of the legal requirements of the State of California. For more information, please visit www.p65Warnings.ca.gov.
$29.99 - $449.99
Creek Premiere POTENT VIBRANT Light Cotton Pretreat
Looking for an easy and effective way to pretreat your garments for printing? Our Creek Manufacturing VIBRANT Light Pretreat is just what you need! This formula is a CMYK ONLY formula. If you are using any white ink, our MF Potent Universal Dark Pretreatment is a better fit. 2nd Day shipping options on the drop down menu will only ship out that product, everything else will separately ground or cheapest way if the FREE SHIPPING option is chosen. With a simple and straightforward application process, this pretreat is designed to make your life simpler. Whether you choose to hang dry and press, use a heat press combo, or opt for conveyor drying, our pretreat is versatile and easy to work with. Plus, it's conveyor-friendly and can even be hang dried, giving you flexibility in your printing process. Not only does our pretreat lay down all the fibers, providing a smooth surface for printing, but it also helps ink adhere to the garment, resulting in a vibrant final print with minimal fibrillation. Say goodbye to staining issues and hello to a high-quality finish! Conveyor-friendly Hang dry compatible Compatible with many DTG printers Concentrate available for cheaper shipping For best results, use with 100% cotton shirts. And remember, it's always important to use proper materials and protective equipment when applying pretreatment. Not made for blends, staining pre and post wash may occur. WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user.
$19.99 - $239.99
Pre Treater Stainless Steel Spray Nozzles for Schulze Pre-Treater 3/III/4/IV/5 800050
Pre Treater Stainless Steel Spray Nozzles 800050. Need help choosing a nozzle? Check out our video.
$28.99
Small Foam Tipped Cleaning Swabs
These foam tipped swabs are small. These are great great for cleaning the small part and tips of cartridges! They also work great for the Spectra 3000 to clean the tips of the bags and also the connectors!
$10.99 - $18.99
TEEJET QUICK GASKET SEAL/O RING - WASHER FOR PEARL AND SCHULZE PRETREATMAKER 3/III 4/IV/5
O ring gasket for Schulze Pretreatmaker 3/III 4/IV/5 and all Pearl Pretreaters
$2.99
Blowout Syringe for Waterfalling Print Heads
This syringe is 60ml, this syringe has multiple uses it can be used for refilling cartridges, or waterfalling print heads. Check out our video on how to do this.
$2.90
