Recommended products (Seguno)

Non OEM  A3/ A3+ / A2 / A1 / R1900 / R2000 / L1800 / XP15000 L805 L801 R1390 Head Compatible Damper. Compatible with print heads listed above Compatible with other models also.  For DTG or DTF printers utilizing the engines listed above Disclaimer: We are not affiliated with Epson, their name is respective or their company. Our products are not associated with Epson or any other mentioned company. The registered names and logos are the sole property of their respective companies.

Read more less

Non OEM  IE3200 / 4720/ i600 Head Compatible Damper. Compatible with print heads listed above Compatible with other models also.  For DTG or DTF printers utilizing the engines listed above Disclaimer: We are not affiliated with Epson, their name is respective or their company. Our products are not associated with Epson or any other mentioned company. The registered names and logos are the sole property of their respective companies.

Read more less

Non OEM  IE3200 / 4720/ i600 Head Compatible Damper. Compatible with print heads listed above Compatible with other models also.  For DTG or DTF printers utilizing the engines listed above Disclaimer: We are not affiliated with Epson, their name is respective or their company. Our products are not associated with Epson or any other mentioned company. The registered names and logos are the sole property of their respective companies.

Read more less

Non OEM  IE3200 / 4720/ i600 Head Compatible Damper. Compatible with print heads listed above Compatible with other models also.  For DTG or DTF printers utilizing the engines listed above Disclaimer: We are not affiliated with Epson, their name is respective or their company. Our products are not associated with Epson or any other mentioned company. The registered names and logos are the sole property of their respective companies.

Read more less

Non OEM  Bajujet Head Compatible Damper. Compatible with print heads listed above Compatible with other models also.  For DTG or DTF printers utilizing the engines listed above Disclaimer: We are not affiliated with Epson, their name is respective or their company. Our products are not associated with Epson or any other mentioned company. The registered names and logos are the sole property of their respective companies.

Read more less

Non OEM Spectra Head Compatible Damper. Compatible with print heads listed above Compatible with other models also.  For DTG or DTF printers utilizing the engines listed above Disclaimer: We are not affiliated with Epson, their name is respective or their company. Our products are not associated with Epson or any other mentioned company. The registered names and logos are the sole property of their respective companies.

Read more less

Looking for high-quality, compatible damper for your Anajet Sprint or FP125 printer? Look no further. Our Non OEM R1900 big mouth damper is the perfect solution. Made with top-notch quality, this damper is designed to meet your printing needs without breaking the bank. Compatible with Anajet Sprint or FP125 High-quality construction Non OEM design Please note that we are an independent company and not affiliated with Epson America. When it comes to reliable DTG parts, we've got you covered.

Read more less

This high-quality filter is the perfect addition to your DTG, DTF, or UV ink system. With a 45mm diameter and a 20 micron size, it effectively filters White, CMYKOG+ inks, keeping your system running smoothly. Compatible with DTF, DTG and UV inks 45mm diameter and 20 micron size Great for filtering White, CMYKOG+ inks Keep your DTG, DTF, or UV ink system in top condition with this versatile circulation filter. Ensure the best print quality and system longevity with this essential part.

Read more less

MIX RATIO IS 1:3.25 This product is not meant to work with white ink prints. Directions for lights are below but you can choose to use the pretreat any of these ways you'd like. Temp depends on color of the garment but lights are usually best pressed at 325F/160C and cured at the same temp or 325F/163C for 45 seconds. If you have a temperature and time that works for you then use it! Make your life simpler.  Here's what Anthony Creek recommends: 1. Hang dry then press 2 times to push fibers down 8 seconds each press.  2.  Press 2 intervals of 17 seconds each at 325F. You need to make sure that the pretreat is dry.   3. Conveyor drying: Conveyor dry at 330F for 3 minutes and 2 presses of 8 second intervals depending on how much pretreat is applied.  Usually on t shirts you will need about 19 grams of pretreat and 39 for hoodies.  We strived to make a pretreat that may achieve the following: *Conveyor Friendly with heat press combo when drying pretreat*Can Be Hang Dried*Fewer Staining Issues Than our Previous Version*Works with many DTG’s *Concentrate Available for Cheaper Shipping Options This product is to be only used with 100% cotton shirts. Using with blended garments may produce results that are questionable pre and post wash. For best results, use with 100% cotton shirts and remember, not made for blends, staining pre and post wash may occur. Warning: Work in a well-ventilated area and use protective equipment (including masks and gloves) when working with specialty printing and curing products and processes such as dtg printers, as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user.  DISCLAIMER NO WARRANTY OR IMPLICATION OF WARRANTY FOR THIS PRODUCT. SINCE THE CONDITION OF HANDLING IS BEYOND OUR CONTROL, WE ASSUME NO LIABILITY FOR LOSS OR INJURY RESULTING FROM THE USE OR THE INFORNMATION HEREIN. ALL CHEMICALS MAY PRESENT UNKNOWN HEALTH HAZARDS AND SHOULD BE USED WITH  CAUTION. SAFE USE OF THIS PRODUCT IS THE  RESPONSIBILITY OF THE USER. USER MUST WASH TEST TO DETERMINE SUITABILITY BEFORE USING IN PRODUCTION ENVIRONMENTS ACCORDING TO EACH GARMENT TYPE AND POST PRODUCTION RESULTS  INCLUDING WASH RESULTS WITH OTHER FABRIC TYPES. REFER TO SDS SHEETS FOR  ADDITIONAL  INFORMATION/HANDLING. ALL GALLON SIZES ARE IN U.S. GALLONS. California Proposition 65 This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. For more information go to www.P65Warnings.ca.gov

Read more less

This Product is one ink funnel filter. Great for those times where you may think something went into your ink bottle but need a solid solution to filter out the funk. The funnel has an air whole also to get better flow with the liquid being poured down the funnel. Can work with all types of inks other than UV. Will work with DTG / Direct To Garment, DTF, Direct To Film, Sublimation, Dye Based, Pigment, water or textile inks.

Read more less

Introducing our COWINT A3 DTF PREMIERE DIRECT TO FILM Transfer Film Sheets! These sheets measure 11-3/4" x 16-1/2" and are designed for hot peel application. When used with our compatible inks, they deliver high quality and vibrant results that will bring your designs to life. Tested to work great with our inks Best to test with your ink set first before purchasing in large quantities when using another ink WARNING: WORK IN A WELL VENTILATED AREA and use Protective Equipment (including masks and gloves) when working with specialty printing and curing products and processes (including DTF, DTG, UV etc.) as fumes and processes may be hazardous. We highly recommend the use of a fume extractor when working with DTF powder in addition to good ventilation and filtration in your work area. The use of all specialty ink printing equipment and supplies such as inks, chemicals, powders etc. are at the sole risk of the user. WARNING!: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Read more less

 Need help choosing the right nozzle? Check out our video

Read more less